Categories
Recent Articles
-
Invisible Guardians: A Comprehensive Guide to the Most Concealed Hidden Cameras November 22, 2024
-
How to Choose the Most SuitableNanny Cam for Parents with Dementia? November 08, 2024
-
Why Installing a Nanny Cam Becomes a Choice for Modern Families? October 31, 2024
Hidden Spy Camera CAMDUCK-007 Smoke Camera Explained
How to turn on/off the smoke hidden spy camera?
Turn on the power for the first time, it will turn on automatically.
After the battery is energized, long press the on/off button for 5 seconds to release it, after 5 seconds, the red and blue indicator light will be on, and 007 will be powered on.
In the power-on state, long press the on/off button for 5 seconds, the indicator light blinks 3 times off to turn off the power.
How to determine whether CAMDUCK-007 spy camera model is successfully connected to the WIFI network?
When CAMDUCK-007 Smoke Spy Camera is turned onIf the red indicator light flashes to off, it means that there is no SD installed.
If the red indicator light is on and off, it means that the SD card has been loaded.
After loading SD, CAM will automatically record and store in SD.
If the blue light blinks to off, it means there is no internet connection.
If the blue indicator light blinks on and off, it means that it is connected to the internet, and the cell phone can be used to monitor and view the CAM monitor screen in real time from any place.
After successfully connected, camduck signal will disappear from your WiFi list.
If there is no networking, please reconfigure the network.
CAMDUCK-007 Smoke Nanny Camera with Battery Model How to use the battery, how to charge it, how long can the battery last?
When you receive it, pull out the battery insulation piece, the camera will automatically turn on, if there is no turn on phenomenon, it means that the battery has no power, charging through the TYPEC port, charging time is 5 hours. After charging point, the battery can be used for about 5 hours.Special reminder about the battery
When charging, please use our attached Type-C data cableWhen the indicator light (next to the Type-C charging port) turns red, it means the device is charging.
When the camera is turned on again, please press and hold the power button for 5 seconds, then wait for a few moments (there may be a slight delay), and you will see the red and blue indicators light up alternately.
This indicates that the unit is ready for normal operation.
How do I reset the CAMDUCK-007 Smoke 007 model?
Note: The reset must be done with the CAM on.
Please check if the red light flashes quickly and then goes out, then the red and blue lights come on and go out after about 1 minute.
If everything above is normal, it means the reset is successful and the WiFi signal will reappear in your WiFi list.
Can't use your cell phone to monitor the screen in real time after going out?
1. Check if the cell phone has network or the network is too slow.
2. Whether the WIFI network connected by CAM is normal or not.
3. Reboot the camera and judge whether CAM has been connected to the internet by the blue indicator light, if the blue indicator light flashes to off, it means it is not connected to the internet, if the blue indicator light is on to off, it means it has been connected to the internet, and the cell phone can be used to monitor and check the CAM monitoring screen in real time from any place. If there is no internet connection, please reconfigure the network. 4.
4. If the environment used by CAM has a sudden power outage, and then the power is turned on again, due to the fast turn-on time of CAM, but the router starts up slowly, resulting in the CAM can not connect to the router, in this case, just restart the camera.
- 2.4 GHz, camduck, camera, Cameras with Audio, children safety, data privacy, hidden camera, hidden cameras, hidden surveillance, hidden usb charger camera, home security, nanny camera, nanny spy camera, office security, pet safety, pets, USB Adapter Camera, USB Charger Camera, Wifi, WiFi cameras, wifi hidden camera, WiFi Router